TWINFAST Rope cutter ø 100 ext.

Tax included
€269.51 Tax excl.
Delay : Contact us

TWINFAST® Rope Cutter

Easy Assembly !

Whitout removing the propeller


ø Shaft
Available on order


Manufactured in 316L stainless steel

Kit delivered with :

  • 1 Rope Cutter
  • 1 Set screw
  • 2 screws M5*25
  • hexagonal key
  • Burette thread lock
  • Set of red protection
  • Installation instructions


Easy maintenance with pressure washer


Due to its design in 2 parts, the rope cutter TWINFAST® is very easy to install, without removing the propeller. It can also remove the rope cutter before removing the propeller to move the tool when the space is limited between the propeller and the stern tube or the chair.

Real security feature, it instantly cut the ropes textile traditionnal and the modern fibers such as kevlar and dyneema.

Special case of the cable: the rope cutter can, depending on engine power, be effective on small diameter of the cableHowever, then we recommend proceeding with the installation of a new rope cutter after usebecause the cable damages the teeth and affects the subsequent performance of the product.


Data sheet

Thickness "C"
17.5 mm
Diameter Ext. "B"
100 mm
0.8 kg

Specific References




Notice de montage TWINFAST

Download (703.69k)

You might also like