TWINFAST Rope cutter ø 120

€266.00
Tax included
€221.67 Tax excl.
Delay 8 to 10 Days

TWINFAST® Rope Cutter

Easy Assembly !

Without removing Propeller

For shaft from 40 mm to 50.8 mm (2")

Patented

ø Shaft
Quantity
Product available on order, delay 8 to 10 days

 

Secure payment by Stripe

 

Secure payment by Paypal

Manufactured in 316L stainless steel

Kit delivered with :

  • 1 Rope Cutter
  • 1 Set screw
  • 2 screws M5*30
  • hexagonal key
  • Burette thread lock
  • Set of red protection
  • Installation instructions

 

Easy maintenance with pressure washer

Due to its design in 2 parts, the rope cutter TWINFAST® is very easy to install, without removing the propeller. It can also remove the rope cutter before removing the propeller to move the tool when the space is limited between the propeller and the stern tube or the chair.

Real security feature, it instantly cut the ropes textile traditionnal and the modern fibers such as kevlar and dyneema.

Special case of the cable: the rope cutter can, depending on engine power, be effective on small diameter of the cableHowever, then we recommend proceeding with the installation of a new rope cutter after usebecause the cable damages the teeth and affects the subsequent performance of the product.

FD40/120CK

Data sheet

Thickness "C"
17.5 mm
Diameter Ext. "B"
120 mm
Weight
1 kg

Specific References

ean13
3760175570179

Download

NOTICE TWINFAST

Notice de montage TWINFAST

Download (703.69k)

You might also like